FACULTY PROFILE

                                        

Mr. Naveen Solanki

Assistant Professor

Office: Room No. 247, Block- II

e-mail: naveensolankiThis email address is being protected from spambots. You need JavaScript enabled to view it.

Date of Joining MAIT: 03-September-2009

Areas of Interest: Refrigeration and Air-Conditioning

Educational Qualifications:

  • Ph.D. (Pursuing, Mechanical Engineering),Delhi Technological University,(formerly Delhi College of Engineering, Delhi University), Delhi, India,
  • M. E. (Thermal Engineering)Delhi College of Engineering,Delhi University, Delhi, India, 2012.
  • B.Tech. (MAE)HMR Institute of Technology and Management,Guru Gobind Singh Indraprastha University, Delhi, India, 2007.

Experience:

1)

Date (from – to)

1st November 2012 – Till Date (Assistant Professor)

 3rd September 2009 (AN) – 31st October 2012 (Lecturer)

Department

Department of Mechanical and Automation Engineering

Name of Employer

Maharaja Agrasen Institute of Technology, Rohini, Delhi – 110086

Type of business or sector

Research and Academic Institute

Type of employment

Regular

Main activities and responsibilities

  • Teaching Under-Graduate Theory and Practical Courses (Department Mechanical and Automation Engineering & Department Mechanical Engineering )
  • Participation in Curriculum development activities.
  • Prepared course materials including laboratory experiments, lectures, exams and assignment problems.
  •  Supervised students in Major (final) projects.

2)

Date (from – to)

3rd September 2008 – 3rd September 2009 (FN) (Lecturer)

Department

Department of Mechanical and Automation Engineering

Name of Employer

Guruprem Sukh Memorial College of Engineering, Budhpur, GT Karnal Road, Delhi

Type of business or sector

Research and Academic Institute

Type of employment

Regular

Main activities and responsibilities

  • Teaching Under Graduate Theory and Practical Courses (Mechanical and Automation Engineering).

3)

Date (from – to)

28th January 2008 – 1st September 2008 (Lecturer)

Department

Department of Mechanical Engineering

Name of Employer

Hindu College of Engineering, Industrial Area, Sonepat-131001(Haryana), INDIA

Type of business or sector

Research and Academic Institute

Type of employment

Regular

Main activities and responsibilities

  • Teaching Under Graduate Theory and Practical Courses (Mechanical Engineering).

4)

Date (from – to)

20th August 2007 – 18th January 2008 (GET)

Department

Project Department (Mechanical)

Name of Employer

Bhushan Steel Limited, At- Narendrepur, P.O. Shibapur, Via Meramandali, Dist.: Dhenkanal-759121, Orissa, INDIA

Type of business or sector

Steel Industry

Type of employment

Regular as a Graduate Engineering Trainee

Main activities and responsibilities

  • Supervised Conveyor Belt Project from Coal section(Ore) to Steel Melting Shop.
  • Supervised Weighing Bridge Project.
  • Supervised Lime Kiln Project for Production of Lime.

Publications:

Book(s) Published:

Author(s)

Naveen Solanki & Vaibhav Jain

Title

Problems and Solutions in Engineering Mechanics (Statics and Dynamics)

Language

ENGLISH

Publication place

BET Publications for Bhavya Books (BET)TM, New-Delhi, India

Date of publication

 January 2013

Author(s)

Naveen Solanki & Vandana Bagla

Title

OPERATIONS RESEARCH (Introduction and Applications)

Language

ENGLISH

Publication place

STANDARD BOOK HOUSE, Delhi, India

unit of : RAJSONS PUBLICATIONS PRIVATE LIMITED

ISBN

978-81-89401-56-6

Date of publication

January 2017

Author(s)

Roop Lal & Ramakant Rana

Title

A Textbook of Engineering Drawing

[Along with an introduction to AutoCAD® 2015]

Language

ENGLISH

Publication place

I.K. International Publishing House Pvt. Ltd., Delhi, India

ISBN

978-93-84588-68-7

Date of publication

August 2015

International Journals

  • Naveen Solanki, Aditya Roy, Chetan Mishra, and Sarthak Jain, “A Review of General and Modern Methods of Air Purification”, Journal of Thermal Engineering, Vol. 5, No. 2, Special Issue 9, pp. 22-28, February, 2019. Yildiz Technical University Press, Istanbul, Turkey (E-ISSN Number – 2148-7847).
  • Naveen Solanki, Aditya Roy, Chetan Mishra, and Sarthak Jain, “A New Design to Achieve Variable Compression Ratio in a Spark Ignition Engine”, Lecture Notes in Mechanical Engineering, Springer, December, 2018. (E-ISSN Number – 2195-4356).
  • Naveen Solanki, Akhilesh Arora, and S. C. Kaushik, “Effect of Condenser Fouling on Performance of Vapor Compression Refrigeration System”, Hindawi Publishing Corporation, Journal of Thermodynamics, Article ID 756452, August 2015.

International Conferences

  • Naveen Solanki, Animesh Pandey, Akash and Deshdeep Gambhir,  “Development And Analysis Of Mathematical Model Of Capillary For Conventional Refrigerants R22, R427A, R407C, R32, R410A”, International Conference On Optimization Techniques & Recent Innovations In Mechanical Engineering (ICOTRIME 2020),11th – 12th Dec 2020 in  Association with IOP Material Science & Engineering, at Krishna Engineering College, U.P., Ghaziabad.
  • Naveen Solanki, Akhilesh Arora and Raj Kumar Singh, “Performance Comparison of Refrigerants Hfo1234yf and Hfo1234ze In a Vapour Compression Refrigeration System Operating Under Fouled Conditions”, 4thInternational conference on emerging trends in mechanical and Industrial engineering (ICETIME-2019), Paper no. 2019ICETMIE11TH, 10th -11th Oct-2019, The NorthCap University, Haryana, Gurugram, India.
  • Naveen Solanki, Aditya Roy, Chetan Mishra, and Sarthak Jain “Theoretical Analysis of a New Design to Achieve Variable Compression Ratio in a Spark Ignition Engine ”, 3rd International conference on "Innovative Design, Analysis and Development Practices in Aeronautical and Automobile Engineering" (IDAD 2018), Chennai, India.
  • Naveen Solanki, Tushar Gulati, Lakshay Malik and Bhuwan Dua, “Atomizer Faucet Integrated with Dual Flow Mode”, National Conference on Design and Innovation,June 2017, IITDelhi, India, ISBN No. 819070985-2.
  • Naveen Solanki, Akhilesh Arora and Raj Kumar Singh, “Performance Evaluation of Fouled Evaporator Vapour Compression System”, International conference on recent advances in mechanical engineering (RAME-2016), Paper no. 39, Oct-2016, DTU, Delhi, India, ISBN-978-194523970-0.

Accomplishments

  • Received an Appreciation Certificate for coordinating one week e-workshop on “Computational Fluid Dynamics (CFD) and its Applications” organized by Department of Mechanical & Automation Engineering and Department of Mechanical Engineering in association with ASHRAE India Chapter (AIC) at Maharaja Agrasen Institute of Technology, Sector-22, Rohini, New Delhi during 19-Oct-2020 to 23-Oct-2020.
  • Received an Appreciation Certificate for securing third position in inter-college B.Tech Major Project Competition – 2018, organized by Guru Gobind Singh Indraprastha University on 08th March 2019.
  • Received an Appreciation Certificate for hard work, commitment and excellent team work from Director of MAIT, Rohini, Delhi, for the award of NBA Accreditation in three Programmes (i.e. B.Tech CSE, ECE and MAE) in Jan 2019.
  • Received an Appreciation Certificate for contribution in making student scoring 100/100 marks in a subject during session 2016-2017.
  • Received an Appreciation Certificate for publishing research papers in sessions 2016-17, 2017-18, 2018-19, 2019-20, 2020-21.
  • Team Member and Mentor for Startup of product “Neerr” (Atomizer-Faucet) in DTU incubation center funded by Delhi Government,Students of MAE-MAIT formed a team called ZeFi Labs for participation, June 2017.
  • Received an Appreciation Certificate and prize for writing a book on Operations Research in January 2017.