Faculty Profile

                                                

Ms. Surabhi Lata        

Assistant Professor

Office: Room No. 233, Block- II

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Date of Joining MAIT: 06-Sept-2010 

Areas of Interest: Machining, Nanoscience

      

Educational Qualifications:

  • Ph.D.,Mechanical Engineering (Pursuing), Indian Institute of Technology, Delhi.
  • M. Tech. (Production Engineering), Delhi Technological University, 2014.
  • B.Tech (Mechanical and Automation Engineering), Indira Gandhi Institute of Technology, Guru Gobind Singh Indraprastha University, 2009.

Experience:

  • Working as Assistant Professor in the Department of Mechanical and Automation Engineering, Maharaja Agarsen Institute of Technology, Rohini since September, 2010.

Publications:

International Journals

  • Surabhi Lata and Siddharth “Sustainable and eco-friendly approach for controlling industrial wastewater quality imparting succour in water-energy nexus system” Energy Nexus, Volume 3, December 2021, https://doi.org/10.1016/j.nexus.2021.100020.
  • Surabhi Lata and Hitesh “A Design Insight for Substitution of Metal Shims with Reverse Engineered Element in Tool Post for Alignment of Tool-Work Center” European Journal of Engineering Science and Technology, ISSN 2538-9181 3 (1):114-129, 2020.  
  • Kshitij Mohan Sharma and Surabhi Lata “Implementation of Lean Manufacturing in a Plastic Grain Manufacturing Company in India: A Case Study” Journal of Material Science and Mechanical Engineering (JMSME) p-ISSN: 2393-9095; e-ISSN: 2393-9109; Volume 3, Issue 6; July-September, 2016 pp. 395-400.
  • Lata Surabhi, Gupta Ashish, Jain Aditya, Kumar Sonu, Srivastava Anindya, Rana Ramakant, “A Review on Experimental Investigation of Machining Parameters during CNC Machining of OHNS”, International Journal of Engineering Research and Applications, Vol. 6, Issue 2, (Part – 4), February 2016, pp. 63-71.
  • Kumar Ravinder, Lata Surabhi, Rana Ramakant, Kumar Pankaj, Kumar Abhinav, Kumar Lakshay, Kumar Jitender Verma, Lal Roop, “Investigation of Surface Morphology in EDM process using Response Surface Methodology”, International Journal of Modern Engineering Research, Vol. 5, Issue 9, September 2015, 54-62.

International Conferences

  • Hitesh, Reeta Wattal and Surabhi Lata “Development and characterization of coal fly ash through low-energy ball milling” International Conference on Advances in Mechanical Engineering and Nanotechnology, March 18-21, 2021, Jaipur, India.
  • Siddharth, Dipender Yadav and Surabhi Lata “Design development and analysis of cylindrical spring with variable pitch for two wheelers” International Conference on Advances in Mechanical Engineering and Nanotechnology, March 18-21, 2021, Jaipur, India.
  • Shevik Bhardwaj, Prashant Verma and Surabhi Lata “ROSHNI: Rural Operational System for Hand-pump Novelty in India” World Congress on Modern Research in Envirotech, Cleantech, Greentech, Nanotech and Water Resources for Global Sustainability (Earth Summit-2017), June 5, 2017, New Delhi, India.
  • Dileep Singh, Surabhi Lata and Ramakant Rana “Reverse Engineered Structure of Tool Post aiding Tool Tip Alignment with Work Center” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  • Surabhi Lata, Ankur Pandey, Labhansh, Ankit Sharma, Kuldeep Meena, Ramakant Rana and Roop Lal “An Experimental Study and Analysis of the Mechanical Properties of Titanium Dioxide reinforced Aluminium (AA 5051) Composite” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  • Sri Kant Rana and Surabhi Lata “GA based Optimization of Process Parameters for Drilling on Al-MgO Metal Matrix Composite” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  • Hitesh and Surabhi Lata “Green Chemistry based Synthesis of Silver Nanoparticles from Floral Extract of Nelumbo Nucifera” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  • Surabhi Lata, Nitish Kumar Verma, Aayush Sharma, Nitesh Gupta, Daksh Chopra and Chetan Singh “Investigation of Properties of Aluminium based nanocomposite reinforced with Biologically Synthesised Silver Nanoparticles” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  • Surabhi Lata, Ramakant Rana and Hitesh “Investigation of Chip-Tool Interface Temperature: Effect of Machining Parameters and Tool Material on Ferrous and Non-Ferrous Metal” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  • Ramakant Rana, R. S. Walia and Surabhi Lata “Development and Investigation of Hybrid Electric Discharge Machining Electrode Process” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  • Kshitij Mohan Sharma and Surabhi Lata “Effectuation of Lean Tool ‘5S’ on Materials and Work Space Efficiency in a Copper Wire Drawing Micro-Scale Industry in India” International Conference on Materials Processing and Characterization (ICMPC-2017), March 17-19, 2017, Hyderabad, India.
  • Ankit Khurana, Vishal Jha, Vivek Porwal, Ankit Deswal, Mayank Gupta, Surabhi Lata and Ramakant Rana “Development of Wireless Robotic Vehicle for Metal Detection” International Conference of Advance Research and Innovation (ICARI-2017), January 29, 2017, Delhi, India.
  • Suraj, Vishal Srivastava, Desh Deep Gambhir and Surabhi Lata “A Quest in Eco-Friendly Fuels for Enhancing the Development through Sustainability Principles” International Conference on Sustainable Development through Research in Engineering and Management (SRDEM-2016), December 26-27, 2016, Haryana, India.
  • Dileep Singh, Rakesh Meena, Surabhi Lata and Ramakant Rana“Redefining the Structure of Uplifting Mechanism of Tool on a Four Way Tool Post” International Conference on Sustainable Development through Research in Engineering and Management (SRDEM-2016), December 26-27, 2016, Haryana, India.
  • Manik Singla, Ramakant Rana and Surabhi Lata “Microstructure and Mechanical Properties of Aluminium based Metal Matrix Composite:  A Review” International Conference on Advanced Production and Industrial Engineering (ICAPIE-2016), December 9-10, 2016, Delhi, India.
  • Siddhartha Pokharia, Surabhi Lata and Ramakant Rana “A Review of Pin-on-Disc Configuration on Sliding Wear and Coefficient of Friction” International Conference on Advanced Production and Industrial Engineering (ICAPIE-2016), December 9-10, 2016, Delhi, India.
  • Ankur Pandey, Ankit Sharma, Labhansh, Ramakant Rana and Surabhi Lata “A Study on Probe and Shoulder Geometry of Friction Stir Welding Tool” International Conference on Advanced Production and Industrial Engineering (ICAPIE-2016), December 9-10, 2016, Delhi, India.
  • Lata Surabhi, Verma Nitish Kumar, Singh Chetan, Lal Roop and Rana Ramakant “Review on Morphology and Microstructure Analysis of MGO Reinforced Al Composites” International Conference on Recent Advances in Mechanical Engineering (RAME-2016), October 14–15, 2016, pp. 663-670, Delhi, India.
  • Kshitij Mohan Sharma and Surabhi Lata “Implementation of Lean Manufacturing in a Plastic Grain Manufacturing Company in India: A Case Study” International Conference on Recent Trends in Mechanical, Material, Industrial, Automotive, Aeronautical and Nano-Technology (MIANT-2016), October 1, 2016, New Delhi, India.
  • Lata Surabhi, Jain Aditya, Gupta Ashish, Kumar Sonu, Srivastava Anindya, Rana Ramakant, “Optimizing Process Parameters for CNC Turned Parts Using Taguchi’s Optimization Technique”, 3rd International Conference on Manufacturing Excellence (MANFEX-2016), March 17-18, 2016, p.p. 7-11.

National Conferences

  • Vishal Jha, Vivek Porwal, Ankit Deswal, Mayank Gupta, Ankit Khurana and Surabhi Lata “Wind Energy: A Source of Sustainable Energy to a Greener World” National Conference on New Horizons in Technology for Sustainable Energy and Environment (NHTSEE-2017), March 9-10, 2017, Haryana, India.