Faculty Profile

                                                

Dr. Vipin Kumar Sharma

Assistant Professor

Department of Mechanical Engineering

Office: Room No. 234, Block- II

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Date of Joining MAIT: 23-July-202

Areas of Interest: Friction, Wear, Lubrication, Composite Materials, Advance Machining

 

Educational Qualifications:

  • Ph.D. (Mechanical Engineering), "Performance Studies of Textured Journal Bearing", Delhi Technology University, 2019. Ph.D. Result
  • M. E. (Mechanical Engineering), University of Delhi, Delhi, 2011.
  • B.Tech. (Mechanical Engineering), Punjab Technical University, Amritsar, 2005.

Experience:

  • Working as Assistant Professor in the Department of Mechanical and Automation Engineering, Maharaja Agarsen Institute of Technology, Rohini since July, 2012.
  • Worked as Assistant Professor in Department of Mechanical  Engineering, SSITM, Aligarh from August 2011 to June, 2012.

Publications:

Some of the Selected Publications are given below

SCI/SCIE/SCOPUS Indexed

  1. Vipin Kumar Sharma, Sumit Joshi, Rajat, Garvit, Tarun, Ishaan, Effect of surface coatings on the tribological properties of sliding contacts, SAE Technical Paper 2023-01-04052023Click to Open the Publication
  2. Vipin Kumar Sharma, RC Singh, R Chaudhary, Improvement in the performance of journal bearings by using lead-free bearing material and surface texturingInternational Journal of Surface Science and Engineering 14 (3), 238-256, 2021 Inderscience Publishers.Click to Open the Publication
  3. V Goel, A Jain, V Heta, S Jain, VK Sharma, Experimental Study of Sliding Wear Behavior of Journal Bearing MaterialsAdvances in Electromechanical Technologies, Lecture Notes in Mechanical Engineering429-437, 2021 Springer. Click to Open the Publication
  4. MK Chaudhary, A Pathak, R Goyal, R Rana, VK Sharma, Fabrication of Aluminium 6082–B4C–Aloe Vera Metal Matrix Composite with Ultrasonic Machine Using Mechanical Stirrer, Advances in Manufacturing and Industrial Engineering, Lecture Notes in Mechanical Engineering, 221-229, 2021 Springer. Click to Open the Publication
  5. Vipin Kumar Sharma, Sumit Chaudhary, Ramesh Chandra Singh, Sonia, Vikas, Vinayak Goel, Reusing marble dust as reinforcement material for better mechanical performance: studies on compositing aluminum matrix, Materials Research Express Vol. 6, Issue 12, 1265f6, 2020 IOP Publishing.Click to Open the Publication
  6. Vipin Kumar Sharma, R.C. Singh, Rajiv Chaudhary, Mayank Saxena, Mukul Anand, Effects of flyash addition on the dry sliding tribological behavior of aluminum composites, Materials Research Express, Vol. 6, Issue 8, 0865f4, 2019 IOP Publishing
  1. Ramesh Chandra Singh, Rajiv Chaudhary, Vipin Kumar Sharma, Fabrication and Sliding Wear Behavior of some lead-free Bearing Materials, Materials Research Express, Vol. 6, Issue 6,066533, 2019 IOP Publishing.Click to Open the Publication
  2. Vipin Kumar Sharma, RC Singh, R Chaudhary Wear and Friction behaviour of Aluminium metal composite reinforced with graphite particles, International Journal of Surface Science and Engineering, Vol. 12, Issue 5/6, pp. 419-432, 2018 Inderscience Publishers.Click to Open the Publication
  3. Vipin Kumar Sharma, RC Singh, R ChaudharyEffect of flyash particles with aluminium melt on the wear of aluminium metal matrix composites, Engineering Science and Technology, An International Journal, Vol. 20 Issue (4), 2017 pp 1318-1323. Elsevier Publication Click to Open the Pulication
  4. V Goel, M Shukla, VK Sharma, Wear and friction study of the coated piston rings materialAdvances in metrology and measurement of engineering surfaces, Lecture Notes in Mechanical Engineering 149-159, 2021, Springer Click to Open the Publication
  5. VK Sharma, V Goel, M Shukla, Effect of Hard Chromium Coating on the Frictional Behavior of Piston Ring MaterialAdvances in Materials Processing, Lecture Notes in Mechanical Engineering153-163, 2020Springer Click to Open the Publication
  6. Vineet Sharma, Rajat Joshi, Himanshu Pant, Vipin Kumar Sharma, Improvement in frictional behaviour of SAE 15W-40 lubricant with the addition of graphite particlesMaterials Today: Proceedings, Vol. 25, 719-723, 2020 Elsevier PublicationLink to Open the Publication
  7. Vipin K. Sharma, R.C. Singh, Rajiv Chaudhary, Experimental Study of Sliding Wear Behavior of the Casted Lead Bronze Journal Bearing Material, SAE Technical Paper 2019-01-0824.Click to Open the Publication
  8. Vipin K. Sharma, R.C. Singh, Rajiv Chaudhary, An experimental study of tribological behaviors of Aluminium- and copper-based metal matrix composites for bearing applications, International Journal of Materials Engineering Innovation, Vol. 10, Issue 3, pp. 203-217, 2019. Inderscience Publication. Click to Open the Publication
  9. Vipin K. Sharma, R.C. Singh, Rajiv Chaudhary , Study of Starting Friction during the Running of Plain Journal Bearing under Hydrodynamic Lubrication Regime, SAE Technical Paper 2018-01-0838, SAE International. Click to Open the Publication
  10. Vipin K. Sharma, R.C. Singh, Rajiv Chaudhary, Experimental Study of Tribological properties of casted aluminium bronze, Materials Today: Proceedings, Vol. 5 Issue (14), Part 2, pp. 28008-28017, 2018 Elsevier Publication.Click to Open the Publication