Faculty Profile

Dr. Sumit Joshi        

Assistant Professor

Office: Room No. 233, Block- II

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.

Date of Joining MAIT: 07-Jan-2019

Areas of Interest: Material characterization, Tribology

 

Educational Qualifications:

  • Ph.D. (Mechanical Engineering), "Tribological behaviours of magnesium alloy sector shape pad with surface modification", Delhi Technological University, New Delhi, 2021.
  • M. Tech. (Production Engineering), Delhi Technological University, New Delhi, 2016.
  • B.Tech. (Mechanical Engineering), Uttarakhand Technical University, Dehradun, 2011.

Experience:

  • Working as Assistant Professor in the Department of Mechanical and Automation Engineering, Maharaja Agrasen Institute of Technology, Rohini since January, 2019.
  • Worked as Graduate Apprentice Trainee in Mahindra & Mahindra Ltd., Haridwar from July 2011 to July, 2012.

Publications:

International Journals

  • Sumit Joshi, Ramesh Chandra Singh, Rajiv Chaudhary, Effect of rotational speed in friction stir processing on the microstructural and mechanical characteristics of cast AS21A magnesium alloy, Materials Research Express 6 (2019) 056554. https://doi.org/10.1088/2053-1591/ab0633. Online ISSN: 2053-1591. (IF=1.929).
  • Joshi, S., Yuvaraj, N., Singh, R., & Chaudhary, R. (2020). Microstructural and Wear Investigations of the Mg/B4C Surface Composite Prepared Through Friction Stir Processing. Trans Indian Inst Met 73, 3007–3018 (2020).https://doi.org/10.1007/s12666-020-02102-8. Online ISSN: 0975-1645. (IF=1.205).
  • Sumit Joshi, Ramesh Chandra Singh, Rajiv Chaudhary, Effect of Friction Stir Processing (FSP) on the Wear Behavior of Cast AS21A Magnesium Alloy, Surface Review And Letters, Vol. 28, No. 01, 2050037 (2021), https://doi.org/10.1142/S0218625X20500377. Online ISSN: 1793-6667. (IF=0.835).
  • Rajiv Chaudhary, Sumit Joshi, Ramesh Chandra Singh, Microstructural and wear characterisation of as-cast AS21A magnesium alloy, Journal of Physics: Conference Series 1240 (2019) 012127,https://doi.org/10.1088/1742-6596/1240/1/012127
  • Ved Prakash Kushwaha, Sumit Joshi, Ramesh Chandra Singh and Rajiv Chaudhary (2020). Characterisation of floor tiles reinforced aluminium surface composite synthesized by friction stir processing. IOP Conference Series: Materials Science And Engineering, 804, 012013.https://doi.org/10.1088/1757-899X/804/1/012013
  • Mayank Saxena, Md. Tarique, Md. Rafi, Mukul Anand, Sumit Joshi, Vipin Kumar Sharma,R. C. Singh and Rajiv Chaudhary (2020). Fabrication and Characterization of hybrid aluminium-fly ash-graphite composite. IOP Conference Series: Materials Science and Engineering, 804, 012032.https://doi.org/10.1088/1757-899X/804/1/012032.
  • Jain, A., Tarique, M., Saxena, M., Rafi, M., Ananad, M., Joshi, S., & Kumar Sharma, V. (2020). Utilisation of fly ash as a potential reinforcement material for better mechanical properties of Aluminum. International Journal of Advanced Production And Industrial Engineering, 5(3), 23-27. doi: 10.35121/ijapie202007344.

International Conferences

  • 8th International Symposium on Fusion of Science and Technology (ISFT) from January 6-10, 2020 held at JCBUST, Faridabad (NCR).
  • 2nd International Conference on New Frontiers in Engineering, Science and Technology (NFEST) during February 18-22, 2019 held at NIT Kurukshetra. Also, member of Organizing Committee in ISFT 2020 conference.
  • 34th National Convention of Mechanical Engineers and National Seminar on 'Mechanical Engineering and Emerging Challenges for Manufacturing', September 07-08, 2018, New Delhi.
  • 1st  International Conference on New Frontiers in Engineering Science & Technology (NFEST-2018), DTU, New Delhi,
  • International Conference on Recent Advances in Mechanical Engineering (RAME-2016), DTU, New Delhi

National Conferences

  • National Conference on Recent Trends in Engineering, Science and Management (NCRTESM-2017), SRCEM, Palwal, Paper No. 170.