Publications Along with DOIs and Citations 2022-2023 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
S. No | Citation | DOI/Link | Faculty | Year | Month | Indexing | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | Sharma, V., Joshi, S., Mittal, R., Kaushik, I. et al., "Effect of Surface Coatings on the Tribological Properties of Sliding Contacts," SAE Technical Paper 2023-01-0405, 2023 | https://doi.org/10.4271/2023-01-0405 | Dr. Vipin Kumar Sharma | 2023 | April | Scopus | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | Jain, Khurana, Sachdeva, Malhotra, & Choraria. (2023). Performance Analysis of Double Skin Air Handling Unit With Active Purification System. ASHRAE Transactions, 129(1), 267–274. | https://technologyportal.ashrae.org/papers/paperdetail/11172 | Dr. Vaibhav Jain | 2023 | February | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | Sharma, V., Joshi, S., Mittal, R., Kaushik, I. et al., "Effect of Surface Coatings on the Tribological Properties of Sliding Contacts," SAE Technical Paper 2023-01-0405, 2023 | https://doi.org/10.4271/2023-01-0405 | Dr. Sumit Joshi | 2023 | April | Scopus | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 |
Solanki, N., Arora, A., & Singh, R. K. (2023, June). Advance exergy and coefficient of structural bond analysis of dedicated mechanical subcooled vapor compression refrigeration system. International Journal of Refrigeration. |
https://doi.org/10.1016/j.ijrefrig.2023.06.008 | Mr. Naveen Solanki | 2023 | June | SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 |
Lata, S., Siddharth, & Divyansh. (2023, June 15). Innovative Design Approach of Mechanical Skimmer for Restoration of Water-bodies from Aquatic Weeds. 2023 5th International Conference on Energy, Power and Environment: Towards Flexible Green Energy Technologies (ICEPE). |
https://doi.org/10.1109/icepe57949.2023.10201478 | Ms. Surabhi Lata | 2023 | June | Scopus | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 |
Sachdeva, G., Jaiswar, A., Anuradha, P., & Jain, V. (2023, August 7). Comparative performance investigation of a dual evaporator cycle using an ejector with the conventional cycle using a pressure reducing valve. International Journal of Air-Conditioning and Refrigeration, 31(1). |
https://doi.org/10.1007/s44189-023-00036-6 | Dr. Vaibhav Jain | 2023 | August | ESCI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Publications Along with DOIs and Citations 2021-2022 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
S. No | Citation | DOI/Link | Faculty | Year | Month | Indexing | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | Gambhir D,Sherwani A.F. Arora A & Ashwni Parametric optimization of blowdown operated double effect Vapor absorption refrigeration system, Journal of Thermal Engineering 8 (1), 78-89 | https://doi.org/10.18186/thermal.1067035 | Dr. Deshdeep Gambhir | 2022 | Febuary | ESCI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | N. Solanki, A. Arora, and R. K. Singh, “Performance Comparison of Refrigerants HFO1234yf and HFO1234ze in a Vapour Compression Refrigeration System Operating Under Fouled Conditions,” 2021. | https://doi.org/10.1007/978-981-15-8304-9_16 | Naveen Solanki | 2021 | December | SCOPUS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | Vipin Kumar Sharma, Sri Kant Rana, Roop Lal and Ramakant Rana, "Wear and Residual Stress Analysis of Waste Sea Shell and B4C Particles Reinforced Green Hybrid Aluminium Metal Composite", Journal of Engg. Research ICARI Special Issue, 2021, pp. 215-224, DOI: https://doi.org/10.36909/jer.ICARI.15317 | https://doi.org/10.36909/jer.ICARI.15317 | Dr. Vipin Kumar Sharma | 2021 | October | SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | Hitesh, R. Wattal and Surabhi Lata, Development and characterization of coal fly ash through low-energy ball milling, Volume 47, Part 11, 2021, Pages 2970-2975, https://doi.org/10.1016/j.matpr.2021.05.204 | https://doi.org/10.1016/j.matpr.2021.05.204 | Surabhi Lata | 2021 | October | SCOPUS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | Siddharth, Dipender, Surabhi LataDesign development and analysis of cylindrical spring with variable pitch for two wheelers, Volume 47, Part 11, 2021, Pages 3105-3111, https://doi.org/10.1016/j.matpr.2021.06.130 | https://doi.org/10.1016/j.matpr.2021.06.130 | Surabhi Lata | 2021 | October | SCOPUS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | Surabhi Lata and Siddharth, Sustainable and eco-friendly approach for controlling industrial wastewater quality imparting succour in water-energy nexus system, Volume 3, 15 December 2021, 100020, https://doi.org/10.1016/j.nexus.2021.100020 | https://doi.org/10.1016/j.nexus.2021.100020 | Surabhi Lata | 2021 | December | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7 | Vipin Kumar Sharma, Modeling and analysis of a novel rotational magnetorheological abrasive flow finishing process, International Journal of Lightweight Materials and Manufacture, Volume 4, Issue 3, September 2021, Pages 290-301, DOI: https://doi.org/10.1016/j.ijlmm.2021.02.001 | https://doi.org/10.1016/j.ijlmm.2021.02.001 | Vipin Kumar Sharma | 2021 | September | SCOPUS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Publications Along with DOIs and Citations 2020-2021 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
S. No | Citation | DOI/Link | Faculty | Year | Month | Indexing | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | Sidharth and N. Kumar, “Performance and emission studies of ternary fuel blends of diesel, biodiesel and octanol,” Energy Sources, Part A Recover. Util. Environ. Eff., vol. 42, no. 18, Sep. 2020, doi: 10.1080/15567036.2019.1607940. | doi: 10.1080/15567036.2019.1607940. | Sidharth | 2020 | September | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | Parvesh Kumar, Ramprasad Mangishetti, Sidharth, “Process Optimization of Biodiesel Production from Jatropha Oil Using Response Surface Methodology and it’s Characterization”, Solid State technology, Vol. 63, No.6, 2020 | http://solidstatetechnology.us/index.php/JSST/article/view/9104 | Sidharth | 2020 | October | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | S. Khurana, A. Haleem, S. Luthra, and B. Mannan, “Evaluating critical factors to implement sustainable oriented innovation practices: An analysis of micro, small, and medium manufacturing enterprises,” J. Clean. Prod., vol. 285, Feb. 2021, doi: 10.1016/j.jclepro.2020.125377. | doi: 10.1016/j.jclepro.2020.125377. | Sonal Khurana | 2021 | Febuary | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | S. Khurana, A. Haleem, S. Luthra, D. Huisingh, and B. Mannan, “Now is the time to press the reset button: Helping India’s companies to become more resilient and effective in overcoming the impacts of COVID-19, climate changes and other crises,” J. Clean. Prod., vol. 280, Jan. 2021, doi: 10.1016/j.jclepro.2020.124466. | doi: 10.1016/j.jclepro.2020.124466. | Sonal Khurana | 2021 | January | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | Sumit Joshi, Utilisation of fly ash as a potential reinforcement material for better mechanical properties of Aluminum, International journal of advanced production and industrial engineering, Vol 5 (3), pp. 23-27 | http://ijapie.org/Impdocs/Vol5/IJAPIE-2020-07-344 | Sumit Joshi | 2020 | December | Crossref | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | S. Joshi, N. Yuvaraj, R. C. Singh, and R. Chaudhary, “Microstructural and Wear Investigations of the Mg/B4C Surface Composite Prepared Through Friction Stir Processing,” Trans. Indian Inst. Met., vol. 73, no. 12, Dec. 2020, doi: 10.1007/s12666-020-02102-8. | doi: 10.1007/s12666-020-02102-8. | Sumit Joshi | 2020 | December | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7 | S. Joshi, R. C. Singh, and R. Chaudhary, “Effect of Friction of Friction stir Processing (FSP) on the wear behavior of cast AS21A magnesium alloy,” Surf. Rev. Lett., vol. 28, no. 01, Jan. 2021, doi: 10.1142/S0218625X20500377. | doi:10.1016/j.jclepro.2020.125377 | Sumit Joshi | 2021 | January | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 | Anmol Gupta, Surbhi Lata, Ramakant Rana, A statistical approach for overcut aand burr minimization during drilling of stir casted MgO reinforced Al composite, Advances in Manufacturing and Industrial Engineering, 2021 | doi.org/10.1007/978981-15-8542-5_23 | Surabhi Lata | 2021 | January | SCOPUS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
9 | V. Jain, R. Rawat, G. Sachdeva, and V. Kumar, “Multi-Objective Optimization of Cascade Refrigeration System Using the Concept of Modified and Advanced Exergy, Risk Level and Thermal Inventory,” Int. J. Air-Conditioning Refrig., vol. 28, no. 04, Dec. 2020, doi: 10.1142/S2010132520500364. | 10.1142/S2010132520500364 | Vaibhav Jain | 2020 | Dec | ESCI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 | V. Jain, A. Singhal, G. Sachdeva, and S. S. Kachhwaha, “Advanced exergy analysis and risk estimation of novel NH3-H2O and H2O-LiBr integrated vapor absorption refrigeration system,” Energy Convers. Manag., vol. 224, Nov. 2020, doi: 10.1016/j.enconman.2020.113348. | 10.1016/j.enconman.2020.113348 | Vaibhav Jain | 2020 | Nov | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
11 | V. Jain and D. Colorado, “Thermoeconomic and feasibility analysis of novel transcritical vapor compression-absorption integrated refrigeration system,” Energy Convers. Manag., vol. 224, Nov. 2020, doi: 10.1016/j.enconman.2020.113344. | doi: 10.1016/j.enconman.2020.113344. | Vaibhav Jain | 2020 | Nov | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | Vikas Kumar, Gulshan Sachdeva, Sandeep Tiwari, Parinam Anuradha and Vaibhav Jain (2021), ‘An Experimental Investigation on Vapor Compression Refrigeration System Cascaded with Ejector Refrigeration System’, International Journal of Air-Conditioning and Refrigeration, Vol. No. 29 pp. 03, 2150028. DOI: https://doi.org/10.1142/S2010132521500280 | https://doi.org/10.1142/S2010132521500280 | Vaibhav Jain | 2021 | March | ESCI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
13 | V. K. Sharma, R. C. Singh, and R. Chaudhary, “Improvement in the performance of journal bearings by using lead-free bearing material and surface texturing,” Int. J. Surf. Sci. Eng., vol. 14, no. 3, 2020, doi: 10.1504/IJSURFSE.2020.110542. | doi: 10.1504/IJSURFSE.2020.110542. | Vipin Kumar Sharma | 2020 | Dec | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
14 | Vipin Kumar Sharma, R C Singh, Rajiv Chaudhary, Effect of fly ash and graphite addition on the tribological behavior of aluminium composites, Surf. Topogr.: Metrol. Prop. 9 2021 025027 | https://doi.org/10.1088/2051-672X/abfea1 | Vipin Kumar Sharma | 2021 | March | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Publications Along with DOIs and Citations 2019-2020 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
S. No | Citation | DOI/Link | Faculty | Year | Month | Indexing | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 | S. Khurana, B. Mannan, and A. Haleem, “Analysis of the critical factors for integration of sustainability with lean practices for Indian manufacturing enterprises,” Int. J. Forensic Eng. Manag., vol. 1, no. 1, 2020, doi: 10.1504/IJFEM.2020.109181. | doi: 10.1504/IJFEM.2020.109181 | Sonal Khurana | 2020 | January | ESCI | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2 | S. Khurana, A. Haleem, and B. Mannan, “Determinants for integration of sustainability with innovation for Indian manufacturing enterprises: Empirical evidence in MSMEs,” J. Clean. Prod., vol. 229, Aug. 2019, doi: 10.1016/j.jclepro.2019.04.022. | doi:10.1016/j.jclepro.2019.04.022. | Sonal Khurana | 2019 | August | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3 | Surabhi Lata , Hitesh, A design insight for substitution of metal shims with reverse engineered element in tool post for alignment of tool work center, European Journal of Engineering Science and Technology, 114-129, (2020). | dpublication.com/journal/EJEST/article/view/248 | Surabhi Lata | 2020 | January | Google Scholar | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
4 | Vaibhav Jain, N. Sharma, G. Sachdeva, and S. Kachhwaha, “Performance analysis and multi-objective optimization of cooling tower assisted vapor compression-absorption cascaded and hybrid refrigeration systems,” Int. J. Green Energy, vol. 16, no. 13, Oct. 2019, doi: 10.1080/15435075.2019.1653874. | doi:10.1080/15435075.2019.1653874. | Vaibhav Jain | 2019 | October | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5 | S. Parashurama, M. S. Govindegowda, Vaibhav Jain and S. B. Anjappa. Hydrocarbons As Alternate Refrigerants In Domestic Refrigerators - An Overview "Indian Journal of Environmental protectection" (2019): 1119-1124 | https://scholar.google.com/citation | Vaibhav Jain, | 2019 | Scopus | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6 | Vinayak Goel and Vipin Kumar Sharma, A Brief Review on Renewable Sources for Biofuel, Journal of Biofuels Vol. 10, Issue 2, July-December, 2019 pp. 51-54 | 10.5958/0976-4763.2019.00013.8 | Vipin Kumar Sharma | 2019 | December | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
7 | Akshat Jain, V. K. Sharma Utilisation of fly ash as a potential reinforcement material for better mechanical properties of Aluminum, International journal of advanced production and industrial engineering, Vol 5 (3), pp. 23-27 | http://ijapie.org/Impdocs/Vol5/IJAPIE-2020-07-344 | Vipin Kumar Sharma | 2020 | July | CrossRef | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8 | V. K. Sharma, S. Chaudhary, R. C. Singh, Sonia, Vikas, and V. Goel, “Reusing marble dust as reinforcement material for better mechanical performance: studies on compositing aluminum matrix,” Mater. Res. Express, vol. 6, no. 12, Jan. 2020, doi: 10.1088/2053-1591/ab6702. | doi: 10.1088/2053-1591/ab6702. | Vipin Kumar Sharma | 2020 | Jan | SCI/SCIE | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
9 | Vipin Kumar Sharma, R. C. Singh, and R. Chaudhary, “An experimental study of tribological behaviours of aluminium- and copper-based metal matrix composites for bearing applications,” Int. J. Mater. Eng. Innov., vol. 10, no. 3, 2019, doi: 10.1504/IJMATEI.2019.101964. | doi:10.1504/IJMATEI.2019.101964. | Vipin Kumar Sharma | 2019 | October | SCOPUS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10 | Experimental Investigation of Machining Characteristics of Al 6063 Aluminium Alloy Using Response Surface Methodology, SAE Technical Paper, 2021, pp. | https://doi.org/10.4271/2021-01-0283 | Vipin Kumar Sharma | 2020 | April | SCOPUS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
11 | Vipin Kumar Sharma R C Singh Prem Kumar Agarwal, “Modelling for the pressure distribution in fluid film of Hydrodynamic Journal Bearing using SAE 20W40 lubricant,” Int. J. Manag. Technol. Eng., vol. 9, no. 5, pp. 3472–3477, 2019. | DOI:16.10089.IJMTE.2019.V9I5.19.28409 | Vipin Kumar Sharma | 2019 | September | UGC | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12 | Mayank Saxena, Md. Tarique, Md. Rafi, Mukul Anand, Sumit Joshi, Vipin Kumar Sharma, R. C. Singh and Rajiv Chaudhary (2020). Fabrication and Characterization of hybrid aluminium-fly ash-graphite composite. IOP: Materials Science and Engineering, 804, 012032 | https://doi.org/10.1088/1757-899X/804/1/012032 | Sumit Joshi | 2020 | June | Scopus | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Publications Along with DOIs and Citations 2018-2019
|